D40cm Inflatable floatig tube/pontoon
(Price per one tube)
|Length 3m||110 USD|
|Length 4m||140 USD|
|Length 5m||175 USD|
|Length 6m||200 USD|
|Additional air chamber||20 USD|
|Rigid frame holder||5 USD|
|Tube for frame holder||2 USD|
|Tape with grommets||7 USD|
|Additional protection||7 USD|
|Length||from 2 to 7m|
|PVC density||850 gr/m|
|Basic protection||Rubber strip allover the bottom seam (included in price)|
With D40 inflatable tubes you can build light and small catamaran for 1-3 passengers. This diameter sometimes uses in sail catamarans because of less air resistance than D50 tubes.
Tubes made with the same fabric as D50 pontoons – special boats PVC fabric with 850 g/m density. Hence D40 tubes are not more lighter than D50 tubes. But D40 floats volume is really different with D50 floats. This PVC fabric is quite corresponds with 40 and 50cm diameter. But by customer offer we can use 1100 g/m PVC. Bottom seam protected with 60mm width rubber strip. Back and front endings made with rigid PVC and protect tubes from physical damage while beaching. All seams glued with additional PVC tape inside tube, you can see it on technology animation.
Difference between tubes shapes
We produce inflatable tubes with four different shapes. Using of the right shape provide of the best characteristics of your boat.
- First shape is the most commonly used for motor pontoon boats. Lowered stern of the pontoon gets a course stability to you.
- Second pontoon shape is better for sailboats or sail catamarans. Another reason of using this shape is longer deck with the same pontoon length. This shape is compromise between first shape and fourth shape.
- Third shape used rarely for rafting catamarans.
- Fourth shape of inflatable tubes lets to make the biggest deck and used for building floating platforms.
Building boat with our pontoons
Inflatable pontoons features
|3m||370 litters||3.5 kg|
|4m||500 litters||4.75 kg|
|5m||630 litters||6 kg|
|6m||760 litters||7.25 kg|
|7m||890 litters||8.5 kg|